Rigips Plasterboard Adhesive

Rigips Plaster Adhesive is a gypsum-based material used to adhere plasterboard and thermal insulation materials. It is used on interior surfaces such as exposed concrete, brick, pumice concrete, AAC. Tested according to the relevant Turkish Standard: TS EN 14496 Gypsum-Based Adhesives for Thermal/Acoustic Insulation Composite Panels and Gypsum Boards.
- 10 kg of Rigips Plasterboard Adhesive is scattered gradually onto 5 liters of clean water in a clean container. Wait for a few minutes for the full contact of water and product.
- It is mixed with a hand mixer or trowel until the plaster becomes homogeneous. The mixer should be operated for maximum of 2 minutes with max. 150-200 cycles per minute.
- Smooth surfaces like exposed concrete should be roughened with Rigiprim Adherence-Enhancing Primer at least 24 hours prior to the application.
- Mortar prepared is applied as fist-sized dabs on the back of the plasterboard surface 10 cm from the sides and with 30 cm intervals.
- After the adherence process, smoothness of the surface is checked by a water gauge and miter