First of all, Glasroc X is a high performance sheathing board. In other words, it is used in interior and exterior cladding. Basically, it enables to cover the wall against external weather. Thus, the British Board of Agrément (BBA) has certified that the Glasroc X provides up to 6 months weather protection. It is defined as a “lightweight” alternative to cement particle based sheets.
Composition of Glasroc Board
Then, Glasroc board is composed of a gypsum core. Besides, both sides are made with additives and acrylic-coated glass mat. As a result, this composition of glass fibre mat and hydrophobic coating offer mould resistant and UV properties. In addition, fire resistance up to 120 minutes is provided (according to Euroclass A1 non-combustible fire performance test).
Application Area of Glasroc Sheathing
Likewise, Glasroc sheathing is mainly used in exterior facades. Also, Steel Frame System (SFS) prior to the installation of the finished exterior facade system is where we need it the most. Particularly, we can apply Glasroc X in the following areas such as:
- Direct render systems
- Exterior Insulation Finishing System / External Thermal Insulation Composite Systems
- Cladding system (ventilated facades)
- External wall system (non-ventilated facades)
Interior Facades:
- In all wet areas and areas with high humidity like residential and commercial buildings
- In humid environments where tile application will be made such as kitchens and bathrooms
- Pool areas with ventilation system, SPA centers and shower areas
- In all wet areas on interior facades that require high moisture resistance
Exterior Facades:
- In exterior wall coverings
- Under the eaves
- In all details requiring high humidity and fire resistance
- In applications where high insulation performance is required
Technical Specification of Glasroc X Exterior Sheathing
- Available size : 1200x2400mm
- Thickness : 12.5mm
- Minimum weight : 11.50 kg/m2
- Face color : white
- Reverse color: white
Advantages of Glasroc X Gypsum Sheathing Board
Thanks to its lightweight attribute, cutting, fixing and screwing the Glasroc X is convenient. Unlike traditional external sheathing boards, we can easily maneuver it. Otherwise, more benefits that can be mentioned are the following ones:
- Fire resistant (up to 120 minutes)
- Moisture and mould resistant
- Resistant to outside weather conditions
- Flexible
- Eco-friendly (recyclable)
Installation of Glasroc Sheathing Board
Effect of Condensation
The thermal insulation and ventilation requirements of national Building Regulations aim to reduce the risk of condensation and mould growth in new buildings. However, designers should take care to eliminate all possibility of problems caused by condensation. This is particularly the case in refurbishment projects.
Cutting
Either cut the board with a plasterboard saw, or score the front face with a sharp knife, snap it over a straightedge. Cut holes for things like socket boxes using a utility saw.
Jointing
To maintain optimum performance, apply Glasroc X Sealant into the joint ensuring good contact is made with the sides of the joints, and ensuring continuity of the seal where required. Tooling can be carried out within 10 minutes if necessary, using a wet tooling stick, trowel or spatula. Surplus sealant can be removed if necessary within 10 minutes using a damp cloth or sponge.
Snagging and Minor Repairs
To maintain all performance requirements it will normally be necessary to replace a damaged board; please contact our Technical Support Team for specific advice.
Storage of Glasroc X Boards
Last but not least, Glasroc X sheets must be stored on a firm, flat and solid ground. In other words, in dry conditions without exposing outside. In fact, this is to avoid any inappropriate weather condition that may damage the product by creating quality product. However, if the boards are temporarily stored outside they should be kept clear of the ground and securely covered with an anchored polythene sheet or tarpaulin.
Our Company
Board & Wall Co. is a drywall materials supplier company based in Istanbul, Turkey. We are currently exporting to 30 countries in Europe, Africa, Middle East, The Caribbean.
Mainly our products are:
✔ gypsum board / plasterboard
✔ fiber cement board
✔ suspended gypsum ceiling
✔ metal framing profiles for partition walls & ceilings
✔ ready mixed joint compound
✔ insulation rolls and panels
✔ bituminous membrane
✔ access panels & accessories
✔ inspection hatch
For more information, we invite you to check our catalogue. Follow us on LinkedIn and Instagram to stay updated about our latest news.
